Air source heat pump water heater: The air source heat pump water heater is mainly composed of a compressor, a heat exchanger, an axial flow fan, an insulated water tank, a water pump, a liquid storage tank, a filter, an electronic expansion Solar water heater valve and an electronic automatic controller. After the power is turned on, the axial flow fan starts to run, and the outdoor air is heat exchanged through the evaporator. The air with a lowered temperature is discharged from the system by the fan. At the same time, the working fluid inside the evaporator absorbs heat and vaporizes and is sucked into the compressor. The compressor compresses this low-pressure working fluid gas into a high-temperature, high-pressure gas and sends it to the condenser. The water forced to circulate by the water pump also passes through the condenser, is heated by the working fluid and sent to the user for use, and the working fluid is cooled into a liquid. The liquid flows into the evaporator again after being throttled and cooled by the expansion Solar water heater valve. The cycle is repeated, and the heat energy in the air is continuously "pumped" into the water, so that the water temperature in the insulated water tank gradually increases, and finally reaches about 55°C, which is just suitable for people to bathe. Air source heat pump is one of the most advanced energy utilization products in the world today.
https://www.delantherma.com/






