1. Daily inspection
Appearance inspection:
Observe the appearance of the solar collector regularly to check if there is any damage, deformation or cracking. Especially after bad weather, check whether the collector has been affected.
Check the connecting pipes and valves for signs of leakage, looseness or corrosion. If there is a problem, repair or replace it in time.
Water temperature check:
Check the temperature of the pool water frequently to ensure that the solar heater is working properly. If the water temperature is abnormal, it may be that the heater is faulty and needs further inspection.
Circulation pump inspection:
Listen to whether the running sound of the circulation pump is normal. If there is abnormal noise, it may be that the pump is faulty.
Check the inlet and outlet pressures of the pump to ensure that the pump is working properly.
2. Regular cleaning
Collector cleaning:
Clean the solar collector every once in a while. You can use a soft damp cloth to wipe the surface of the collector to remove dust, dirt, leaves and other debris.
If there are stubborn stains on the surface of the collector, you can use a mild detergent to clean it, but be careful not to damage the surface coating of the collector.
Pipe cleaning:
Clean the connecting pipes regularly to prevent dirt and debris from accumulating in the pipes and affecting the circulation of water. You can use pipe cleaners or high-pressure water guns for cleaning.
Filter cleaning:
Check and clean the pool water filter to ensure that the filter is working properly and prevent impurities from entering the solar heater system.
III. Seasonal maintenance
Winter maintenance:
Before the arrival of winter, drain the water in the solar collector and connecting pipes to prevent the water from freezing at low temperatures and damaging the equipment.
You can use special antifreeze or take other insulation measures to protect the solar heater system from freezing in winter.
Summer maintenance:
When the temperature is high in summer, pay attention to check the heat dissipation of the solar collector to ensure that the collector does not overheat.
You can shade the collector or adjust the angle of the collector to reduce the time of direct sunlight.
IV. Professional maintenance
Regular inspection:
It is recommended to ask professionals to conduct a comprehensive inspection and maintenance of the solar pool heater every year. Professionals can check the operating status of the equipment, make necessary adjustments and repairs, and ensure the safe and efficient operation of the equipment.
Fault repair: If the solar heater fails, do not disassemble and repair it by yourself, but contact a professional for treatment in time. Self-repair may cause more serious damage and even endanger personal safety.
If you want to know the maintenance and care methods of solar pool heaters, welcome to contact Haining Delan Technology, we will do our best to help you!
