A solar heater works through a process that effectively harnesses solar energy to heat water or air.
For a solar water heater, the key component is the solar collector. There are two main types of collectors: flat-plate and vacuum-tube collectors.
In a flat-plate collector, a dark-colored absorber plate is enclosed in an insulated box with a glass or plastic cover. The absorber plate is usually made of metal with a high heat-absorption capacity. When sunlight strikes the collector, the absorber plate absorbs the solar radiation and converts it into heat. The heat is then transferred to a fluid (usually a mixture of water and antifreeze in colder climates) that circulates through tubes attached to the absorber plate.
The heated fluid is pumped through a heat exchanger. In the heat exchanger, the heat from the fluid is transferred to the water stored in a tank. As a result, the water in the tank gets warmer. Some systems use a passive design, where the heated fluid rises due to natural convection and circulates without the need for a pump.
In the case of a solar air heater, the principle is similar. Solar radiation is absorbed by a dark-colored surface, heating the air in contact with it. The warm air is then circulated through ducts into the living space or used for other heating purposes. The whole process is a clean and efficient way to utilize solar energy for heating requirements.
If you want to know about wholesalers near me, please visit the following www.delantherma.com








