Daily maintenance: 1. The Solar water heater valve storage environment should be paid attention to. It should be stored in a dry and ventilated room, and both ends of the passage should be blocked. 2. The Solar water heater valve should be checked regularly, and the dirt on it should be removed, and anti-rust oil should be applied on its surface. 3. After the Solar water heater valve is installed and applied, it should be regularly inspected to ensure its normal operation. 4. Check whether the Solar water heater valve sealing surface is worn, and repair or replace it according to the situation. 5. Check the wear of the trapezoidal thread of the Solar water heater valve stem and the Solar water heater valve stem nut, whether the packing is outdated and invalid, etc., and make necessary replacements. 6. The sealing performance of the Solar water heater valve should be tested to ensure its performance. 7. The Solar water heater valve in operation should be intact, the bolts on the flange and the bracket are complete, the threads are intact, and there is no looseness. 8. If the handwheel is lost, it should be replaced in time, and it cannot be replaced with an adjustable wrench. 9. The packing gland is not allowed to be skewed or without pre-tightening clearance. 10. If the Solar water heater valve is used in a harsh environment and is easily contaminated by rain, snow, dust, wind and sand, etc., a protective cover should be installed for the Solar water heater valve stem. 11. The scale on the Solar water heater valve should be kept complete, accurate and clear, and the Solar water heater valve should be sealed and capped. 12. The insulation jacket should be free of dents and cracks. 13. Avoid knocking the Solar water heater valve in operation or supporting heavy objects.
https://www.delantherma.com/







