+8613511348445
Home / Knowledge / Details

Aug 23, 2024

Common problems of Solar water heater valves

1 Why can't the double seal Solar water heater valve be used as a cut-off Solar water heater valve?

The advantage of the double-seat Solar water heater valve core is the force balance structure, which allows a large pressure difference, while its prominent disadvantage is that the two sealing surfaces cannot be in good contact at the same time, resulting in large leakage. If it is artificially and forcibly used in cutting occasions, the effect is obviously not good, even if many improvements are made to it (such as double-seal sleeve Solar water heater valve), it is not advisable. 2 Why is the double-seat Solar water heater valve easy to vibrate when the regulating Solar water heater valve is working at a small opening? For a single core, when the medium is a flow-open type, the Solar water heater valve stability is good; when the medium is a flow-closed type, the Solar water heater valve stability is poor. The double-seat Solar water heater valve has two Solar water heater valve cores, the lower Solar water heater valve core is in a flow-closed state, and the upper Solar water heater valve core is in a flow-open state. In this way, when working at a small opening, the flow-closed Solar water heater valve core is easy to cause the Solar water heater valve to vibrate, which is why the double-seat Solar water heater valve cannot be used for working at a small opening. 3 Why is the anti-blocking performance of the straight-stroke regulating Solar water heater valve poor, and the anti-blocking performance of the angle-stroke Solar water heater valve is good? The Solar water heater valve core of the straight-stroke Solar water heater valve is vertical throttling, while the medium flows in and out horizontally. The flow channel in the Solar water heater valve cavity must turn and turn, making the flow path of the Solar water heater valve quite complicated (such as an inverted S shape). In this way, there are many dead zones, which provide space for the precipitation of the medium. If things go on like this, it will cause blockage. The throttling direction of the angle-turn Solar water heater valve is horizontal. The medium flows in horizontally and flows out horizontally, which can easily take away the unclean medium. At the same time, the flow path is simple and there is little space for the medium to precipitate, so the angle-turn Solar water heater valve has good anti-blocking performance. 4 Why is the cut-off pressure difference of the angle-turn Solar water heater valve larger? The cut-off pressure difference of the angle-turn Solar water heater valve is larger because the torque generated by the combined force of the medium on the Solar water heater valve core or Solar water heater valve plate on the rotating shaft is very small, so it can withstand a large pressure difference. 5 Why is the Solar water heater valve stem of the linear control Solar water heater valve thinner? It involves a simple mechanical principle: large sliding friction and small rolling friction. The Solar water heater valve stem of the linear Solar water heater valve moves up and down, and the packing is slightly tightened, so it will wrap the Solar water heater valve stem very tightly, resulting in a large backlash. For this reason, the Solar water heater valve stem is designed to be very small, and the packing is often made of PTFE packing with a small friction coefficient to reduce the backlash, but the problem is that the Solar water heater valve stem is thin, it is easy to bend, and the packing life is also short. The best way to solve this problem is to use a rotary Solar water heater valve stem, that is, an angular stroke regulating Solar water heater valve. Its Solar water heater valve stem is 2 to 3 times thicker than a straight stroke Solar water heater valve stem, and a long-life graphite packing is selected. The Solar water heater valve stem has good rigidity and a long packing life. 6 What is a hard seal? The cut-off Solar water heater valve requires the leakage to be as low as possible. The leakage of the soft seal Solar water heater valve is the lowest. The cut-off effect is of course good, but it is not wear-resistant and has poor reliability. From the dual standards of small leakage and reliable sealing, the soft seal cut-off is not as good as the hard seal cut-off. For example, a full-function ultra-light regulating Solar water heater valve is sealed and protected by wear-resistant alloy, has high reliability, and a leakage rate of 10 to 7, which can meet the requirements of the cut-off Solar water heater valve.

https://www.delantherma.com/

Send Message