The following matters need to be noted when using solar collectors:
1. Installation
Professional installation: Be sure to have professionals perform the installation to ensure that it is secure, correct and in compliance with safety regulations. The installation location should be selected in a sunny, unobstructed and easy-to-maintain place, such as a roof.
Load-bearing considerations: Before installation, confirm whether the load-bearing capacity of the installation location is sufficient to support the weight of the solar collector, including the collector itself, the bracket, and possible water storage tanks.
Angle and orientation: According to the local latitude and the position of the sun, the angle and orientation of the collector should be reasonably adjusted to maximize the reception of sunlight and improve the heat collection efficiency. Generally speaking, in the northern hemisphere, the collector can be installed with a tilt facing south to achieve better results.
2. During use
Prevent scalding: The solar collector will increase the temperature of the water or heat transfer medium inside under sunlight. Be careful when using hot water to avoid being scalded by overheated water. You can adjust the water temperature first and then use hot water.
Save water: Use hot water reasonably to avoid waste. For example, do not let hot water flow for a long time without using it, and turn off the faucet in time.
Observe the weather: In the case of continuous rainy days or insufficient sunlight, the heating effect of the solar collector will be affected and may not meet the demand for hot water. At this time, you can consider auxiliary heating methods or reduce the use of hot water.
Avoid empty sun: When the solar collector is not used for a long time, such as business trips, travel, etc., the water in the collector and water storage tank should be drained to avoid the collector from being empty at high temperatures to avoid damaging the collector and related components.
3. Maintenance
Regular inspection: Regularly check the various components of the solar collector, including the collector itself, pipes, brackets, seals, etc., to see if there are any damage, water leakage, looseness, etc. If any problems are found, they should be repaired or replaced in time.
Clean the collector: Dust, dirt, etc. are easily accumulated on the surface of the collector, affecting the collection efficiency. Clean the surface of the collector regularly, you can use a soft damp cloth to wipe it, and avoid scratching with hard objects to avoid damaging the collector.
Check the insulation layer: Check whether the insulation layer of the water storage tank is intact. If there is any damage, it should be repaired in time to ensure the insulation effect of hot water.
Pipeline maintenance: Pay attention to antifreeze measures for pipelines in winter, such as installing electric heating cables. At the same time, regularly check whether the pipelines are blocked or leaking, and clean and repair them in time.
Water quality treatment: According to the local water quality, regularly clean the water tank to remove scale and impurities to ensure the quality of hot water and the normal operation of the system. You can use professional cleaning agents or ask professionals to clean it.
If you want to know the precautions for using solar collectors, welcome to pay attention to www.delantherma.com!
